Product ID:SCOTCHWELD 2216A ADHESIVE (GRAY)
MSDS Date:04/12/1990
FSC:8040
NIIN:00-145-0432
Kit Part:Y
MSDS Number: BDCGZ

3M CENTER

ST PAUL, MN 55144-1000

Emergency Phone: 612-733-1110 (OP55)

Info Phone: 612-733-1110

Cage: 07884

MECHANICAL SPRING CORP

BROOKLYN, NY 11217-2702 US

Telephone: 718-852-0116

Cage: 07884

ALIPHATIC AMINE

Fraction By Weight: 61.0%

ALUMINUM SILICATE PIGMENT(CLAY)

Fraction By Weight: 39.0%

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1.00%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

568 G/L PER MFR'S MSDS

RTECS: 9999999VO

Effects of Overexposure:EYE:EXTR IRRT MAY CAUSE PERM EYE DAMAGE.
SKN:IRRT&SENS.INHAL:IRRT.INGES:IRRT GI TRACT.

First Aid:EYE:FLUSH COPIOUSLY WATER 10 MIN. SKN:THOROUGH WASH SOAP &
WATER. INH:REMOVE TO FRESH AIR. INGES:DRINK TWO GLASSES OF MILK OR
WATER.CALL PHYSICIAN

Extinguishing Media:CO2,FOAM,DRY CHEMICAL,WATER
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE AREA,COLLECT SPILLED MATERIAL.
CLEANUP RESIDUE,PLACE IN APPROVED METAL CONTAINER.

Handling and Storage Precautions:AVOID CONTACT WITH EYE & SKIN.AVOID
INHL OR EYE CONTACT WITH DUST FROM GRINDING OPERATIONS. WASH
CONTAMINATED CLOTHING BEFORE REUSE.
Other Precautions:LAUNDER CONTAMINATED CLOTHES BEFORE RE-USE.

Respiratory Protection:NONE
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SCBA IN FIRE. USE DUST MASK WHEN GRINDING
CURED RESIN.
Supplemental Safety and Health
PART OF TWO PART KIT. BASIS: MSDS DTD 1 NOV 85(OSHA HAZCOMSTD), 3M
DOCUMENT 1031749. 3M GENERIC P/N IS 62-2217-XXXX-X. KIT ALSO KNOWN
AS 2216B/A OR 3M EC2216B/A (GRAY).KEY1:L1.

HCC:N1
Spec Gravity:1.26
Viscosity:52000CP
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY PASTE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, N, SMOKE PARTICLS ON EXPOSURE
EXCESS HEAT OR FLAME

Waste Disposal Methods:OBSERVE ALL APPLICABLE REGS BEFORE DISPOSAL.
CURED RESIN (A&B):DISPOSE IN SAND LANDFILL.SPILL: DISPOSE OF
CLEANUP MATL BY INCINERATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.